Saba and Dimitri where fantastic to deal with. Their attention to detail and quality of their workmanship created a great result which exceeded my expectations. Will definitely use there services again and highly recommend
Front & Rear Merbau Deck Restoration in Freshwater
Full stripping, rejuvenation, nylon brush sanding, and a three-coat Natural finish across two decks.
- Timber: Merbau Hardwood 140 × 19 mm
- Size: Large (70-150m²)
- Completed in March 2026


Project Overview
At this ground-floor apartment in Freshwater, the owners wanted to refresh two Merbau decks—a 48m² rear deck and a 25m² front deck—without replacing structurally sound timber. Years of Intergrain UltraDeck applications had built up across the 140 × 19 mm boards, leaving both areas darker, heavier and less natural than the client preferred. The brief was to fully remove the old film-forming finish, restore the timber’s cleaner appearance and apply a lighter system that would reveal the Merbau grain again. With no carpentry repairs required, the project focused on consistent preparation across both separate outdoor zones.
The Challenge
The decks were at ground level, but the unit’s position within a multi-building residential complex made access and washing logistics more difficult than the size alone suggested. Reaching both areas required hoses and service lines of up to 100 metres, while all noisy work had to be carefully scheduled within building restrictions to minimise disruption to neighbouring residents. The accumulated UltraDeck also needed complete removal from two separate spaces, with the same preparation standard maintained across each deck so the final Natural finish would appear consistent.
Scope of Work
Materials Used
- Decking: Existing Merbau Hardwood 140 × 19 mm
- Existing Coating: Intergrain UltraDeck
- Primer: Haymes UVEX Primer
- Finish: Haymes Dexpress Natural (Two coats)
Our Approach & Process
Because the Merbau remained structurally sound, the project was planned as a complete finish reset rather than a repair job. We coordinated access and working hours with the residential setting, then followed the same controlled preparation and three-coat finishing system across the front and rear decks to produce one consistent result.
Stripping & Rejuvenation Across Two Decks
We stripped the accumulated Intergrain UltraDeck from both deck areas, using the long service lines needed to reach the work zones while carefully controlling wash water within the complex. Rejuvenation treatment then removed residual contamination and restored the Merbau closer to its natural colour, preparing both surfaces for even sanding and coating.
Nylon Brush Sanding & Natural Finish
We completed gentle nylon brush sanding to remove raised fibres without unnecessarily thinning the 140 × 19 mm boards. Haymes UVEX Primer was then applied, followed by two coats of Haymes Dexpress Natural to both decks. The lighter translucent system restored visible grain and created a fresh, consistent appearance across the front and rear areas.
The Final Result
The two decks now feel brighter, cleaner and more connected, with the heavy coated appearance replaced by a lighter finish that allows the natural Merbau grain to show through. Both the 48m² rear deck and 25m² front deck were restored without unnecessary timber replacement, and the work was completed around the apartment complex’s access and noise restrictions. Pleased with the result, the client joined DeckCare’s annual maintenance program to preserve the finish.
What the Client Said
Want a similar result for your deck in Freshwater?
If your deck needs restoration, repairs, or a complete rebuild, send us a few details. We’ll get back to you with honest advice, clear next steps, and a transparent quote.
Better yet, see us in person No spam, no obligations — just honest advice.



















