Opens in a new tab

Spotted Gum Deck Restoration & Polyurethane Removal in Rozelle

Heavy polyurethane removal, rejuvenation, controlled sanding, and a three-coat Natural finish across two rear decks.

Rozelle Spotted Gum Polyurethane Removal Before
Before
Rozelle Spotted Gum Polyurethane Removal After
After

Project Overview

At this Rozelle property, two rear Spotted Gum decks—15m² and 25m²—had lost their natural appearance after an interior flooring contractor applied a polyurethane floor finish outdoors many years earlier. The unsuitable coating initially created a sealed look, but exposure eventually caused widespread fading, peeling and failure across both decks. The owners wanted to preserve the existing hardwood rather than replace it and bring back the visible grain and colour of the Spotted Gum. With the boards structurally sound and no carpentry repairs required, the project focused on completely removing the failed polyurethane and rebuilding the finish with a suitable exterior system.

Rozelle Spotted Gum Polyurethane Removal
Rozelle Spotted Gum Polyurethane Removal
Rozelle Spotted Gum Polyurethane Removal

The Challenge

The main challenge was the polyurethane itself. Unlike a standard decking coating, the interior product had formed a hard film over the boards and inside the gaps, making complete removal slow and detailed. Several heavy stripping passes were required, followed by careful work between boards and around edges so no incompatible coating remained beneath the new system. Both decks also needed to be prepared to the same standard despite their different sizes and exposure, while avoiding unnecessary timber loss during sanding. Any remaining residue could affect adhesion and compromise the new exterior finish.

Scope of Work

  • Buff Sanding
  • Detail Sanding
  • Heavy-Duty Stripping
  • Nylon Brush Sanding
  • Primer & Finish Application
  • Rejuvenation

Materials Used

  • Decking: Existing Spotted Gum Hardwood
  • Previous Coating: Interior Polyurethane Floor Finish
  • Primer: Haymes UVEX Primer
  • Finish: Haymes Dexpress Natural (Two coats)

Our Approach & Process

Changing from a failed interior polyurethane to a proper exterior finishing system required a complete reset rather than a light recoat. We worked through both rear decks in controlled stages, first removing the incompatible film and restoring the raw Spotted Gum, then refining the surface and applying a three-coat Haymes system.

Heavy Polyurethane Removal & Rejuvenation

We completed multiple heavy stripping passes to break down the failed polyurethane, including detailed removal from between the boards and around perimeter edges. Once the incompatible film was fully cleared, the Spotted Gum received a rejuvenation treatment to neutralise residues, remove weathering and return the timber closer to its clean natural colour.

Rozelle Spotted Gum Polyurethane Removal
Rozelle Spotted Gum Polyurethane Removal
Rozelle Spotted Gum Polyurethane Removal

Controlled Sanding & Natural Finish

Nylon brush sanding removed remaining fibres while protecting the board thickness, followed by buff sanding and targeted detail sanding through gaps, corners and confined areas. We then applied Haymes UVEX Primer and two coats of Haymes Dexpress Natural, creating a durable exterior system that restored visible grain without returning the decks to a heavy coated appearance.

Rozelle Spotted Gum Polyurethane Removal
Rozelle Spotted Gum Polyurethane Removal
Rozelle Spotted Gum Polyurethane Removal

The Final Result

The two rear decks now look bright, natural and close to newly installed Spotted Gum, with the failed peeling polyurethane completely replaced by a suitable exterior system. The 15m² and 25m² areas were restored without unnecessary board replacement, and the Natural finish allows the timber’s colour and grain to remain visible. The transformation gave both decks a genuine second life and significantly improved the overall appearance of the rear outdoor areas, leaving the client delighted with the result.

What the Client Said

Rating: 5 of 5

Thank you Saba and Dimitri for a wonderful job. Attention to detail was above and beyond expectations with a fantastic result. Reliable and were pleasant to deal with. I would highly recommend them.

Want a similar result for your deck in Rozelle?

If your deck needs restoration, repairs, or a complete rebuild, send us a few details. We’ll get back to you with honest advice, clear next steps, and a transparent quote.

Better yet, see us in person
No spam, no obligations — just honest advice.
Or just simply call us
DeckCare team photo

More Projects Like This

  • Freshwater Front & Rear Merbau Restoration

    Freshwater, NSW
    • Nylon Brush Sanding
    • Primer & Finish Application
    • Rejuvenation
    • Stripping
    View This Project
    Freshwater Front & Rear Merbau Restoration Before
    Before
    Freshwater Front & Rear Merbau Restoration After
    After
  • Stanmore Tallowwood Decking & Limestone Restoration

    Stanmore, NSW
    • Buff Sanding
    • Deep Cleaning
    • Limestone Cleaning
    • Limestone Sealing
    • Mould & Moss Removal
    • Penetrating Oil Application
    • Rejuvenation
    • Stripping
    View This Project
    Stanmore Tallowwood Decking & Limestone Restoration Before
    Before
    Stanmore Tallowwood Decking & Limestone Restoration After
    After
  • Dee Why Merbau Black Japan Restoration

    Dee Why, NSW
    • Colour Matching
    • Nylon Brush Sanding
    • Primer & Finish Application
    • Stripping
    View This Project
    Dee Why Merbau Black Japan Restoration Before
    Before
    Dee Why Merbau Black Japan Restoration After
    After
View All Projects
Secret Link